Updated Information

* Updated `build.sh`
* Updated `README.md`

README.md

@@ -1,29 +1,69 @@
-## 📖About
-
+## 📖 About
 Drive Health is a program written in golang to help with tracking and monitoring of your hardware's temperature.
 
-This tool has been with the purpose of installing it in different servers I own with different configurations to help keep track of the temperature of different hard-disks, ssds, nvme drives, etc... The testing has been very limited to only 4 different computers and not on laptops so expect some mishaps.
+This tool had been conceived with the purpose of installing it on different servers I own with different configurations to help keep track of the temperature of hard-disks, ssds, nvme drives, etc...
+
+### Features
+- Disk Listing
+- Temperature Graphing
+- Disk activity logging
+- [API](./lib/web/api.go)
 
 ![UI Example](./media/design_v1.webp)
 
-## ❗Disclaimer
-
+## ❗ Disclaimer
 I'm not exactly a linux hardware wizard, so I honestly have no clue about a lot of things and I myself can tell there's a lot to improve upon and that there's a lot of other things missing that are a little bit more obscure, I personally don't currently own any m.2 sata drives to test the code on, or many of the other drive types, I have only tested on HDD, SSD and NVMe drives, any issues opened would help me so much!
 
-## ❗Requirements
+## ❗ Requirements
 1. A linux machine, this will NOT work on macOS or on Windows, it's meant to be ran on servers as a service with which administrators can privately connect to for temperature logging.
 
 2. Please make sure you have the [**drivetemp kernel drive**](https://docs.kernel.org/hwmon/drivetemp.html) you can check this by running `sudo modprobe drivetemp`.
 The program depends on this to be able to log the temperature of your devices.
 
 
-## 📖How to use
+## 📖 How to use
+1. Follow the `Deployment` section instrcutions to launch the program
 
-The program is straight forward to use really, edit the [.env](./.env) file and make the changes you would like applied.
+2. Once the program has launched, access it in your browser
 
-### Docker ( Recommended/Hassle free )
+3. Enter the administrative username and password for the simple HTTP Auth
+
+4. You now have access to the application, you can monitor your disk's temperature over a period of time.
+
+## 🐦 Deployment
+To deploy the application you have multiple choices, the preffered method should be one which runs the binary directly and not containerization, the `docker` image is taking up a wopping `1Gb+` because I have to include sqlite3-dev and musl-dev dependencies, which sucks, so I whole heartedly recommend just installing this on your system as a binary either with `SystemD` or whichever service manager you are using.
+
+Download binaries from [the releases page](https://github.com/JustKato/drive-health/releases)
+
+### 🐋 Docker
+In the project there's a `docker-compose.prod.yml` which you can deploy on your server, you will notice that there's also a "dev" version, this version simply has a `build` instead of `image` property, so feel free to use either.
+
+Please do take notice that I have just fed the `environment file` directly to the service via docker-compose, and I recommend you do the same but please feel free to pass in `environment` variables straight to the process as well.
+
+[Docker Compose File](./docker-compose.prod.yml)
+```yaml
+version: "3.8"
+
+services:
+  drive-health:
+    # Latest image pull, mention the specific version here please.
+    image: ghcr.io/justkato/drive-health:latest
+    # Restart in case of crashing
+    restart: unless-stopped
+    # Load environment variables from .env file
+    env_file:
+      - .env
+    # Mount the volume to the local drive
+    volumes:
+      - ./data:/data
+    # Setup application ports
+    ports:
+      - 5003:8080
+```
+
+### 💾 SystemD
+When running with SystemD or any other service manager, please make sure you have a `.env` inside the `WorkingDirectory` of your runner, in the below example I will simply put my env in `/home/daniel/services/drive-health/.env`
 
-### SystemD
 ```ini
 [Unit]
 Description=Drive Health Service
@@ -40,18 +80,19 @@ Restart=on-failure
 WantedBy=multi-user.target
 ```
 
-## ❔FAQ
+## ❔ FAQ
 
 ### How does it work?
-Currently the program does not depend on any hardware library as I couldn't find anything that would not require root access while giving me the possibility to interrogate the temperature of the drives, I chose not to depend on `lsblk` either, so how does the program work? Well it looks in `/sys/block` and simply
+Currently the program does not depend on any go library for hardware detection as I couldn't find anything that would not require root access while giving me the possibility to interrogate the temperature of the drives.
+
+I chose not to depend on `lsblk` either, so how does the program work?
+The program currently looks in `/sys/block` and then tries to make sense of the devices, I have had limited testing with my hardware specs, any issues being open in regards to different kinds of hardware would be highly appreciated
 
 ### Why not just run as root?
-I really, really, **really** want to avoid asking people to run **ANY** program I write as root and even try and prevent that from happening since that's how things can go bad, especially because I am runnig actions over hardware items. I think you can see how easy it is for a mistake or a **malicious attack** to easily deal damage
+I really, REALLY, **REALLY** want to avoid asking people to run **ANY** program I write as root and even try and prevent that from happening since that's how things can go bad, especially because I am running actions over hardware devices.
 
 ## Support & Contribution
-
 For support, bug reports, or feature requests, please open an issue on the [GitHub repository](https://github.com/JustKato/drive-health/issues). Contributions are welcome! Fork the repository, make your changes, and submit a pull request.
 
 ## License
-
 This project is licensed under the [Apache License 2.0](./LICENSE).

build.sh

@@ -1,19 +1,50 @@
-#!/bin/sh
+#!/usr/bin/env bash
 
 set -o pipefail
 set -u
 
+# Function to display messages in color
+echo_color() {
+    color=$1
+    text=$2
+    case $color in
+        "green") echo -e "\033[0;32m$text\033[0m" ;;
+        "yellow") echo -e "\033[0;33m$text\033[0m" ;;
+        "red") echo -e "\033[0;31m$text\033[0m" ;;
+        *) echo "$text" ;;
+    esac
+}
+
+# Getting GIT_VERSION from the most recent tag or commit hash
+GIT_VERSION=$(git describe --tags --always)
+if [ -z "$GIT_VERSION" ]; then
+    echo_color red "Error: Unable to determine GIT_VERSION."
+    exit 1
+fi
+
 APP_NAME="drive-health"
 DIST_DIR="${DIST_DIR:-dist}"
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+# make sure we are in the source dir
+cd $SCRIPT_DIR;
 
 # Create the dist directory if it doesn't exist
 mkdir -p $DIST_DIR
 
 # Build the application
-echo "Building the application..."
+echo_color yellow "[🦝] Building the application..."
 GOOS=linux CGO_ENABLED=1 GOARCH=amd64 go build -o $DIST_DIR/$APP_NAME
 
-# echo "Copying additional resources..."
+# Copying additional resources...
 cp -r static templates $DIST_DIR/
 
-echo "Compilation and packaging completed."
+echo_color yellow "[🦝] Compilation and packaging completed, archiving..."
+
+cd $DIST_DIR/
+
+zip "drive-health_$GIT_VERSION.zip" -r .
+
+# TODO: Add reliable method of cleaning up the compiled files optionally
+
+cd $SCRIPT_DIR;